View 74LVC3GU04GD_4725609.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74LVC3GU04
Triple inverter
Rev. 07 -- 11 November 2009 Product data sheet
1. General description
The 74LVC3GU04 provides three inverters. Each inverter is a single stage with unbuffered output. Inputs can be driven from either 3.3 V or 5 V devices. These features allow the use of these devices in a mixed 3.3 V and 5 V environment.
2. Features
I I I I Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant input/output for interfacing with 5 V logic High noise immunity Complies with JEDEC standard: N JESD8-7 (1.65 V to 1.95 V) N JESD8-5 (2.3 V to 2.7 V) N JESD8B/JESD36 (2.7 V to 3.6 V) ESD protection: N HBM JESD22-A114F exceeds 2000 V N MM JESD22-A115-A exceeds 200 V 24 mA output drive at VCC = 3.0 V CMOS low power consumption Latch-up performance exceeds 250 mA Multiple package options Specified from -40 C to +85 C and from -40 C to +125 C.
I
I I I I I
3. Ordering information
Table 1. Ordering information Package Temperature range 74LVC3GU04DP 74LVC3GU04DC -40 C to +125 C -40 C to +125 C Name TSSOP8 VSSOP8 Description plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm plastic very thin shrink small outline package; 8 leads; body width 2.3 mm Version SOT505-2 SOT765-1 Type number
NXP Semiconductors
74LVC3GU04
Triple inverter
Table 1.
Ordering information ...continued Package Temperature range Name XSON8 Description plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm Version SOT833-1 SOT996-2 SOT902-1 -40 C to +125 C -40 C to +125 C
Type number 74LVC3GU04GT 74LVC3GU04GD
XSON8U plastic extremely thin small outline package; no leads; 8 terminals; UTLP based; body 3 x 2 x 0.5 mm XQFN8U plastic extremely thin quad flat package; no leads; 8 terminals; UTLP based; body 1.6 x 1.6 x 0.5 mm
74LVC3GU04GM -40 C to +125 C
4. Marking
Table 2. Marking codes Marking code[1] VU04 VU4 VU4 VU4 VU4 Type number 74LVC3GU04DP 74LVC3GU04DC 74LVC3GU04GT 74LVC3GU04GD 74LVC3GU04GM
[1]
The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
1
1A
1Y 1
2A
2Y 1
3A
3Y
001aah793
001aah794
Fig 1.
Logic symbol
Fig 2.
IEC logic symbol
VCC
VCC
100
A
Y
mna636
Fig 3.
74LVC3GU04_7
Logic diagram (one gate)
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
2 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
6. Pinning information
6.1 Pinning
74LVC3GU04
1A 1 8 VCC
3Y
2
7
1Y
74LVC3GU04
2A 1A 3Y 2A GND 1 2 3 4
mnb120
3
6
3A
8 7 6 5
VCC 1Y 3A 2Y GND 4 5 2Y
001aac021
Transparent top view
Fig 4.
Pin configuration SOT505-2 (TSSOP8) and SOT765-1 (VSSOP8)
Fig 5.
Pin configuration SOT833-1 (XSON8)
74LVC3GU04
terminal 1 index area 1Y 1 VCC 8
74LVC3GU04
1A 3Y 2A GND 1 2 3 4 8 7 6 5 VCC
7
1A
3A 1Y 3A 2Y 2Y
2
6
3Y
3 4
5
2A
GND
001aag056
001aal098
Transparent top view
Transparent top view
Fig 6.
Pin configuration SOT996-2 (XSON8U)
Fig 7.
Pin configuration SOT902-1 (XQFN8U)
6.2 Pin description
Table 3. Symbol Pin description Pin SOT505-2, SOT765-1, SOT833-1 and SOT996-2 1A, 2A, 3A GND 1Y, 2Y, 3Y VCC 1, 3, 6 4 7, 5, 2 8 SOT902-1 7, 5, 2 4 1, 3, 6 8 data input ground (0 V) data output supply voltage Description
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
3 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
7. Functional description
Table 4. Input nA L H
[1] H = HIGH voltage level; L = LOW voltage level.
Function table[1] Output nY H L
8. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol VCC VI VO IIK IOK IO ICC IGND Ptot Tstg
[1] [2]
Parameter supply voltage input voltage output voltage input clamping current output clamping current output current supply current ground current total power dissipation storage temperature
Conditions
[1]
Min -0.5 -0.5 -0.5 -50 -100
Max +6.5 +6.5 VCC + 0.5 50 50 100 250 +150
Unit V V V mA mA mA mA mA mW C
Active mode VI < 0 V VO > VCC or VO < 0 V VO = 0 V to VCC
[1]
Tamb = -40 C to +125 C
[2]
-65
The input and output voltage ratings may be exceeded if the input and output current ratings are observed. For TSSOP8 packages: above 55 C the value of Ptot derates linearly with 2.5 mW/K. For VSSOP8 packages: above 110 C the value of Ptot derates linearly with 8.0 mW/K. For XSON8, XSON8U and XQFN8U packages: above 45 C the value of Ptot derates linearly with 2.4 mW/K.
9. Recommended operating conditions
Table 6. Symbol VCC VI VO Tamb t/V Operating conditions Parameter supply voltage input voltage output voltage ambient temperature input transition rise and fall rate VCC = 1.65 V to 2.7 V VCC = 2.7 V to 5.5 V Active mode Power-down mode; VCC = 0 V Conditions Min 1.65 0 0 0 -40 Max 5.5 5.5 VCC 5.5 +125 20 10 Unit V V V V C ns/V ns/V
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
4 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
10. Static characteristics
Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol VIH VIL VOH Parameter HIGH-level input voltage LOW-level input voltage HIGH-level output voltage Conditions VCC = 1.65 V to 5.5 V VCC = 1.65 V to 5.5 V VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V VOL LOW-level output voltage VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V II ICC CI VIH VIL VOH input leakage current supply current input capacitance HIGH-level input voltage LOW-level input voltage HIGH-level output voltage VCC = 1.65 V to 5.5 V VCC = 1.65 V to 5.5 V VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V VCC - 0.1 0.95 1.7 1.9 2.0 3.4 V V V V V V VI = 5.5 V or GND; VCC = 0 V to 5.5 V VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V; IO = 0 A 0.8 x VCC 0.1 0.1 5 0.1 0.45 0.3 0.4 0.55 0.55 5 10 0.2 x VCC V V V V V V A A pF V V VCC - 0.1 1.2 1.9 2.2 2.3 3.8 V V V V V V Min Typ[1] Max Unit V Tamb = -40 C to +85 C 0.75 x VCC 0.25 x VCC V
Tamb = -40 C to +125 C
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
5 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
Table 7. Static characteristics ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol VOL Parameter LOW-level output voltage Conditions VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V II ICC input leakage current supply current VI = 5.5 V or GND; VCC = 0 V to 5.5 V VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V; IO = 0 A 0.1 0.70 0.45 0.60 0.80 0.80 20 40 V V V V V V A A Min Typ[1] Max Unit
[1]
All typical values are measured at Tamb = 25 C.
11. Dynamic characteristics
Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V). For test circuit see Figure 9. Symbol Parameter tpd Conditions
[2]
-40 C to +85 C Min Typ[1] 2.3 1.8 2.6 2.3 1.7 7 Max 5.0 4.0 4.5 3.7 3.0 -
-40 C to +125 C Unit Min 0.5 0.3 0.3 0.3 0.3 Max 6.3 4.0 5.6 4.5 3.8 ns ns ns ns ns pF
propagation delay nA to nY; see Figure 8 VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V VCC = 3.0 V to 3.6 V VCC = 4.5 V to 5.5 V
0.5 0.3 0.3 0.3 0.3
[3]
CPD
power dissipation capacitance
VI = GND to VCC; VCC = 3.3 V
-
[1] [2] [3]
Typical values are measured at Tamb = 25 C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively. tpd is the same as tPLH and tPHL. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs.
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
6 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
12. Waveforms
VI nA input GND t PHL VOH nY output VOL VM VM
mna344
VM
VM
t PLH
Measurement points are given in Table 9. VOL and VOH are typical output voltage levels that occur with the output load.
Fig 8. Table 9. VCC
The input (nA) to output (nY) propagation delays Measurement points Input VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC Output VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC
Supply voltage 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
7 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
VEXT VCC VI VO DUT
RT CL RL RL
G
mna616
Test data is given in Table 10. Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times.
Fig 9. Table 10. VCC
Load circuitry for measuring switching times Test data Input VI VCC VCC 2.7 V 2.7 V VCC tr = t f 2.0 ns 2.0 ns 2.5 ns 2.5 ns 2.5 ns Load CL 30 pF 30 pF 50 pF 50 pF 50 pF RL 1 k 500 500 500 500 VEXT tPLH, tPHL open open open open open
Supply voltage 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
8 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
13. Additional characteristics
mnb108
160 gfs (mA/V) 120
Rbias = 560 k
80
VCC
0.47 F
input
output
100 F
40
VI (f = 1 kHz)
A IO
0
GND
mna050
0
1
2
3
4
5 6 VCC (V)
I O g fs = --------V I Fig 10. Test set-up for measuring forward transconductance
Tamb = 25 C.
Fig 11. Typical forward transconductance as a function of supply voltage
14. Application information
R2
R1
VCC
1 F R2 R1
U04
ZL
U04
C1 C2
out
mna052
mna053
ZL > 10 k R1 3 k R2 1 M Open loop gain: Gol = 20 Voltage gain: G v = - --------------------------------------R1
C1 = 47 pF C2 = 22 pF R1 = 1 M to 10 M R2 optimum value depends on the frequency and required stability against changes in VCC or average minimum ICC (ICC = 2 mA at VCC = 3.3 V and f = 10 MHz).
G ol
1 + ------ ( 1 + G ol ) R2
Vo(p-p) = VCC - 1.5 V centered at 0.5 x VCC Unity gain bandwidth product is 5 MHz.
Fig 12. Linear amplifier application
Fig 13. Crystal oscillator application
Remark: All values given are typical values unless otherwise specified.
74LVC3GU04_7 (c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
9 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
15. Package outline
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2
D
E
A
X
c y HE vMA
Z
8
5
A pin 1 index
A2 A1
(A3)
Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1.1 A1 0.15 0.00 A2 0.95 0.75 A3 0.25 bp 0.38 0.22 c 0.18 0.08 D(1) 3.1 2.9 E(1) 3.1 2.9 e 0.65 HE 4.1 3.9 L 0.5 Lp 0.47 0.33 v 0.2 w 0.13 y 0.1 Z(1) 0.70 0.35 8 0
Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 REFERENCES IEC JEDEC --JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16
Fig 14. Package outline SOT505-2 (TSSOP8)
74LVC3GU04_7 (c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
10 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
SOT765-1
D
E
A X
c y HE vMA
Z
8
5
Q A pin 1 index A2 A1 (A3) Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1 A1 0.15 0.00 A2 0.85 0.60 A3 0.12 bp 0.27 0.17 c 0.23 0.08 D(1) 2.1 1.9 E(2) 2.4 2.2 e 0.5 HE 3.2 3.0 L 0.4 Lp 0.40 0.15 Q 0.21 0.19 v 0.2 w 0.13 y 0.1 Z(1) 0.4 0.1 8 0
Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 REFERENCES IEC JEDEC MO-187 JEITA EUROPEAN PROJECTION
ISSUE DATE 02-06-07
Fig 15. Package outline SOT765-1 (VSSOP8)
74LVC3GU04_7 (c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
11 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm
SOT833-1
1
2
3
b 4 4x L
(2)
L1
e
8 e1
7 e1
6 e1
5
8x
(2)
A
A1 D
E
terminal 1 index area 0 DIMENSIONS (mm are the original dimensions) UNIT mm A(1) max 0.5 A1 max 0.04 b 0.25 0.17 D 2.0 1.9 E 1.05 0.95 e 0.6 e1 0.5 L 0.35 0.27 L1 0.40 0.32 1 scale 2 mm
Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. OUTLINE VERSION SOT833-1 REFERENCES IEC --JEDEC MO-252 JEITA --EUROPEAN PROJECTION ISSUE DATE 07-11-14 07-12-07
Fig 16. Package outline SOT833-1 (XSON8)
74LVC3GU04_7 (c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
12 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
XSON8U: plastic extremely thin small outline package; no leads; 8 terminals; UTLP based; body 3 x 2 x 0.5 mm
SOT996-2
D
B
A
E
A
A1
detail X terminal 1 index area e1 L1
1
e
b
4
v w
M M
CAB C
C y1 C y
L2
L
8 5
X
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max 0.5 A1 0.05 0.00 b 0.35 0.15 D 2.1 1.9 E 3.1 2.9 e 0.5 e1 1.5 L 0.5 0.3 L1 0.15 0.05 L2 0.6 0.4 v 0.1 w 0.05 y 0.05 y1 0.1
OUTLINE VERSION SOT996-2
REFERENCES IEC --JEDEC JEITA ---
EUROPEAN PROJECTION
ISSUE DATE 07-12-18 07-12-21
Fig 17. Package outline SOT996-2 (XSON8U)
74LVC3GU04_7 (c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
13 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
XQFN8U: plastic extremely thin quad flat package; no leads; 8 terminals; UTLP based; body 1.6 x 1.6 x 0.5 mm
SOT902-1
D terminal 1 index area
B
A
E
A A1
detail X
L1 L
e
4
e v M C A B w M C
5
C y1 C y
3
metal area not for soldering
2 6
b
e1
e1
7 1
terminal 1 index area
8
X
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max 0.5 A1 0.05 0.00 b 0.25 0.15 D 1.65 1.55 E 1.65 1.55 e 0.55 e1 0.5 L 0.35 0.25 L1 0.15 0.05 v 0.1 w 0.05 y 0.05 y1 0.05
OUTLINE VERSION SOT902-1
REFERENCES IEC --JEDEC MO-255 JEITA ---
EUROPEAN PROJECTION
ISSUE DATE 05-11-25 07-11-14
Fig 18. Package outline SOT902-1 (XQFN8U)
74LVC3GU04_7 (c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
14 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
16. Abbreviations
Table 11. Acronym CMOS DUT ESD HBM MM Abbreviations Description Complementary Metal-Oxide Semiconductor Device Under Test ElectroStatic Discharge Human Body Model Machine Model
17. Revision history
Table 12. Revision history Release date 20091111 Data sheet status Product data sheet Product data sheet Product data sheet Product data sheet Product data sheet Product data sheet Product data sheet Change notice Supersedes 74LVC3GU04_6 74LVC3GU04_5 74LVC3GU04_4 74LVC3GU04_3 74LVC3GU04_2 74LVC3GU04_1 Document ID 74LVC3GU04_7 Modifications: 74LVC3GU04_6 74LVC3GU04_5 74LVC3GU04_4 74LVC3GU04_3 74LVC3GU04_2 74LVC3GU04_1
*
Added type number 74LVC3GU04GD (XSON8U package)
20080304 20071005 20070315 20050201 20041027 20040512
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
15 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
18. Legal information
18.1 Data sheet status
Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Product status[3] Development Qualification Production
Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
18.2 Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
18.3 Disclaimers
General -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental
18.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
19. Contact information
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
74LVC3GU04_7
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 07 -- 11 November 2009
16 of 17
NXP Semiconductors
74LVC3GU04
Triple inverter
20. Contents
1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 16 17 18 18.1 18.2 18.3 18.4 19 20 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 4 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Additional characteristics . . . . . . . . . . . . . . . . . 9 Application information. . . . . . . . . . . . . . . . . . . 9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 16 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 16 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Contact information. . . . . . . . . . . . . . . . . . . . . 16 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) NXP B.V. 2009.
All rights reserved.
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 11 November 2009 Document identifier: 74LVC3GU04_7

▲Up To Search▲

Price & Availability of 74LVC3GU04GD

	To Download 74LVC3GU04GD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .